Interested? Contact us here!
Honda Centre

3766 1st Avenue (at Boundary Road) Burnaby, B.C. V5C 3V9

Toll free: 866 299-1022
Tel: 604-293-1022
Fax: 604-293-1060

Hours of Operation

Sunday & Monday: Closed
Tuesday – Friday: 9:00 am – 5:30 pm
Saturday: 9:00 am – 5:00 pm

Honda 15DKSHC Portable Outboard, Short Shaft

Price: $3,599.00

15DK3SHC Two cylinder, 15″ short shaft, manual start, tiller steering

With a compact size just slightly larger than the BF9.9–but with more power–the BF15 is perfect for aluminum fishing boats, inflatables, sailboats or as a kicker for larger fishing boats. It has one of the largest displacements in its class, giving you big performance, and the added reliability of 4-Front Corrosion Protection and Engine Alert System.

*Value does not include freight, pdi and applicable taxes.

  • swap_vertFeatures

    1. donePerformance and Efficiency
    2. done Honda Four-Stroke Engine Design
    3. done The BF15s utilize a 350 cc, 2-cylinder, in-line, OHC design powerhead. World-renowned Honda quality combines proven reliability and quiet operation with no gas-oil mixing.
    4. done Pendulum-Motion Vibration Dampening
    5. done An exclusive Honda feature, the pendulum-motion mounting system for the powerhead helps absorb the vibration, including longitudinal vibration, which was difficult to reduce successfully by conventional rubber mounts. The pendulum mount does this without the use of a heavy balancer shaft, which also significantly reduces overall weight.
    6. done Increased Reverse Thrust
    7. done When reversing, the exhaust gases are diverted through additional exhaust relief ports above the cavitation plate, allowing the propeller to back up into clean, bubble-free water, thereby increasing reverse thrust.
    8. done Reliability and Durability

    1. done PGM-IG Ignition
    2. done PGM-IG ignition provides reliable starts and optimum ignition timing, enhancing running performance across the entire speed range.
    3. done Complete Engine-Management System
    4. done Electronically controlled monitoring system protects the engine components from over-revving, low engine-oil pressure and overheating.
    5. done Regulated Charging System
    6. done A high-quality regulator/rectifier is standard on all models to prevent overcharging the battery.
    7. done Fresh Water Flushport
    8. done Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required).
    1. done Ultra Low 3 Star CARB Emissions
    2. done Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards.
    3. done Three-Year Warranty
    4. done The best outboards are backed by the best warranty, 3 years parts and labour.
    5. done Convenience and Ease of Use
    6. done Auto-Choke System
    7. done An automatically controlled start-up fuel-enrichment system ensures optimum air-fuel ratio to the engine, eliminating the chores of choke operation and greatly simplifying engine start-up (Electric-start models).
    8. done Lightweight, Rounded Design
    9. done Easy to transport, ideal for 12-16 ft. fishing boats), inflatables and pontoon boats especially, with remote-control power-tilt models available. Rounded ergonomics won't catch fishing lines as easily.
    10. done High-Output Charging System
    11. done All electric-start models are fitted with a high-output charging system that will deliver an amazing 12 amps at only 3,000 rpm to keep your electronics working and batteries charged.
    12. done Easy-Pull Starting
    13. done The programmed-ignition system sets the ignition system during start-up to reduce the effort required to pull start the engine.
    14. done Forward-Mounted Shift Lever
    15. done Allows more control and comfort in shifting.
    16. done Quick-Twist Throttle Friction Adjuster
    17. done A simple twist of the throttle friction collar located right at the throttle grip allows you to adjust the throttle tension up or down, minimizing driver fatigue.
    18. done Front-Mounted Steering-Friction Adjuster
    19. done A new quick-adjust lever design located just above the transom bracket allows for precise adjustments at your fingertips.
    20. done Integrated Carrying Handle
    21. done A convenient, foldaway carry handle is situated at the exact horizontal balance point of the engine so that the engine carries more easily in a level position.
    22. done Long Tiller Handle
    23. done The BF15 tiller models use a long tiller handle for increased control and reduced steering effort. The tiller handle is also made of lightweight composite for increased strength and weight reduction.
    24. done Standard Fuel Tank, Hose and Propeller
    25. done A 12.5-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment.
  • swap_vertSpecifications

      ENGINE Type 4-Stroke SOHC; 2 Cylinders / 4 Valves
      Displacement 350 cc / 21.4 cubic in.
      Bore & Stroke 59 mm x 64 mm (2.32 x 2.52 in.)
      Full Throttle RPM Range 4,500-5,500 RPM
      Propshaft Rated Horsepower (HP) 15 hp @ 5,000 RPM
      Cooling System Water Cooled
      Fuel Delivery 1 Carburetor
      Recommended Fuel Unleaded Gas. (Min. Pump Octane 86) NO ETHANOLE
      Ignition System PGM-IG
      Starting System Recoil (Electric / Recoil)
      Exhaust Under Water, above propeller
      Lubrication Forced Lubrication (Trochoid pump)
      Recommended Oil SAE 10W30 API service classification SJ or later
      Oil Capacity 1.30 L (1.14 Imp. qt) with oil filter repl.
      Trim Range 4-Stage 8°-12°-16°-20°
      Tilt Range 71° (S-type); 72° (L-Type)
      Steering AngleN/A
      DRIVE Gear Ratio2.08:1 Gear Shift F-N-R
      EQUIPMENT Alternator (Manual Start) 6 amp / 76 watts
      Alternator (Electric Start) 12 amp / 152 watts
      Oil Pressure Alert Standard
      Over Rev-Limiter Standard
      Temperature Alert Standard

      DIMENSIONS Overall Width 350 mm / 13.7 in. Transom Height (S-Type) 432 mm / 17 in.

      Transom Height (L-Type) 563 mm / 22.2 in. Transom Height
      PROPELLER Propeller Type 4-Blade (Aluminum) Propeller Diameter x Pitch (S-Type)
      235 mm x 254 mm / 9-1/4 x 10 in.
      Propeller Diameter x Pitch (L-Type)
      235 mm x 254 mm / 9-1/4 x 10 in.
      DRY WEIGHT S-Type 46.5 kg / 103 lbs.
      SHS-Type 50.0 kg / 110 lbs.
      L-Type 49.5 kg / 109 lbs.
      *Optional built-in Pitot tube kit required.
      **The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
      Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
      When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
      It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.
      Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.

  • swap_vertAdditional Information

      The listed Manufacturer's Suggested Retail Prices (MSRP) do not include installation costs and applicable taxes.
      Prices are subject to change without notice.
      Inbound Freight abd PDI, $65, Taxes PST/GST (12%)