Interested? Contact us here!
Honda Centre

3766 1st Avenue (at Boundary Road) Burnaby, B.C. V5C 3V9

Toll free: 866 299-1022
Tel: 604-293-1022
Fax: 604-293-1060

Hours of Operation

Sunday & Monday: Closed
Tuesday – Friday: 9:00 am – 5:30 pm
Saturday: 9:00 am – 5:00 pm

2019 CRF250RX – PRICE TBA

Price: $0.00

Price is MSRP and does not include Inbound freight and PDI: $TBA
the BC tire Levy or taxes PST&GST (12%)

VIN: TBA | Stock: TBA


THE ALL-NEW 2019 CRF250RX

PRICE TBA

Enduro Conquistador.

Ready for the biggest news the off-road riding community is going to hear this year? Introducing the all-new Honda CRF250RX, a high-performance trail/enduro machine built to exploit all the advantages a 250 has to offer. Bigger Baja bikes may get all the attention, but 250 riders know where their bikes really shine: on tight, technical trails that leave those big open-class riders panting and exhausted, while they use the light weight and maneuverability to flick through challenging terrain. So we’ve equipped the new CRF250RX with the same great engine and chassis as the CRF250R motocrosser, but added an 18-inch rear wheel, a bigger fuel tank, special suspension settings, a sidestand, and more. It’s all about giving you the best bike in the class.

  • swap_vertFeatures

    1. doneNew 2019 Cam Profiles
    2. done With input directly from our HRC works team, we’ve given the new CRF250RX the same cam profiles on our 2019 CRF250R. You should feel the engine rev more freely, as well as improved torque feel in the bottom end.
    3. done New Throttle Body
    4. done With a 2mm smaller venturi designed to speed up airflow, the CRF250RX’s new throttle body really reaps benefits at low engine operating speeds. You get power and snap, right now.
    5. done New Double-Spray Injector Settings
    6. done The CRF250RX’s fuel-injection system sprays twice per intake cycle. That helps increase fuel atomization without adding the weight or complexity of a second injector. The better fuel atomization means more power in the midrange and on overrev—you’ll feel it the first time you ride.
    7. done Large Valve Diameters
    8. done The CRF250RX’s valves don’t just have impressive lift, the valves themselves are large-diameter too—33mm intakes and 26mm exhausts. Combined with the high lift, the twin-cam CRF250RX flows a lot more, especially at high revs when you’re wicking it up.

    1. done High Redline
    2. done With our better-breathing DOHC design and the big-bore/short-stroke engine, the CRF250RX’s rev limit is way impressive. The same goes for peak power and peak torque.
    3. done Big Power
    4. done Feel free to hold that throttle open and head for the first turn—the CRF250RX is designed to win that critical holeshot drag race.
    5. done Engineering
    6. done HRC Launch Control
    7. done We’re talking about a special ECU program here: push the button to select the mode, hold the throttle open, release the clutch, and the CRF250RX will do the rest, launching you into the first turn with a big advantage. It turns your bike into a holeshot-seeking machine!
    8. done Electric Start
    1. done The new CRF250RX is equipped with an effortless electric starter. Convenient and lightweight, it’s a huge deal if you need to restart a stalled bike in the heat of battle.
    2. done DOHC Engine Layout
    3. done The CRF250RX uses a double-overhead-cam (DOHC) engine layout with a unique finger-follower rocker design. Together with the rest of the engine’s architecture (bore and stroke, intake tract, piston, and more), you get more power and a higher redline.
    4. done High-Capacity Resin Fuel Tank
    5. done For longer enduro loops, the CRF250RX features a bigger fuel tank that holds a full 2.25 gallons.
    6. done New Gear-Position Engine Mapping
    7. done Talk about smart: The CRF250RX features an ECU with special engine mapping for each gear. You can’t give an inch in this class, so having your engine deliver optimal power for each gear choice is one of the features that separates CRF250RX riders from the rest.
    8. done Engine Mode Select Button
    9. done This simple handlebar-mounted button lets you dial in engine power delivery character with a push of your thumb. Choose between Standard, Smooth and Aggressive, depending on course conditions.
    10. done Titanium Intake and Exhaust Valves
    11. done Light is right when it comes to a high-revving engine’s reciprocating masses. That’s why the CRF250RX uses titanium intake and exhaust valves. Plus, the valve angle is a super-narrow 20.5 degrees (included). Ovalized valve springs and long-wearing Diamond-Like Carbon (DLC) treated finger rockers complete the package.
    12. done Downdraft Intake and Exhaust Layout
    13. done The DOHC cylinder-head design let our engineers straighten out the CRF250RX’s intake and exhaust tracts. The intake is shorter and just about arrow straight, and the exhaust flows more efficiently too. No athlete’s going to win a sprint if he tries to run while holding his breath, and it’s no different with your bike’s engine. You’ll experience both more power and better throttle response.
    14. done Big Bore/Short Stroke
    15. done The CRF250RX’s 79mm bore and short 50.9mm stroke let our engineers create a high-revving engine with plenty of room for large valves. The engine breaths and revs—the two keys to making power in the enduro world.
    16. done Dual-Exhaust System
    17. done The CRF250RX’s dual-exhaust system is light, compact, and positioned close and low in the frame to take weight off the rear end and bring more mass to the bike’s center for improved handling. It also allows for more airflow, and that equals added horsepower.
    18. done Total Air Management
    19. done Total air management means complete attention to how efficiently air gets through the intake, through the head, and out the exhaust. Eliminate losses here, and you make more power everywhere. And the best part? It’s free horsepower—you just need a bike with smart design.
    20. done Bridged-Box Piston
    21. done The new CRF250RX features a bridged-box piston design developed on our factory racebikes. Why? The reinforcing structure between the skirts and the wrist-pin bosses lets this big-bore piston retain a light, strong construction and helps enable the CRF250RX’s high redline.
    22. done “H” Section Crank
    23. done Look closely at the CRF250RX’s crankshaft profile and you’ll see its “H” cross-section design. What’s up with that? Just like a structural “I” beam in an aircraft wing or a skyscraper, it boosts strength and cuts weight over a conventional crank’s shape—a big deal when you consider this part spins at over 14,000 rpm!
    24. done Gradual Pipe-Bend Radius
    25. done Notice how the CRF250RX’s dual exhaust pipes make gradual, large-radius bends out of the head, then flow straight back to the mufflers with no abrupt angle changes. Getting the exhaust out of the engine—while still maintaining a tuned exhaust length, is the key to power, while the pipes’ low mass and twin-silencer design optimize the CRF250RX’s center of mass for superior handling.
    26. done Clutch Design and Materials
    27. done The CRF250RX’s clutch uses two different types of friction material. Why? The clutch can handle the increased power of the engine without being any larger. The lighter rotating weight is directly related to how fast the engine revs.
    28. done Lithium-Iron-Phosphate Battery
    29. done Like the rest of the CRF250RX, the bike’s Lithium-Iron-Phosphate battery is both super light and high performing. In fact, it weighs less than half the weight of a conventional lead-acid battery.
    30. done Engine Oil Scavenge Pump
    31. done Deep in the engine, there’s a special oil scavenge pump. While you may never see it, it helps keep the CRF250RX’s overall design compact.
    32. done Shared Engine/Gearbox Lubrication
    33. done The 2019 CRF250RX uses a shared engine/transmission oiling design. Why? Combining the two systems shaves weight and helps make the engine more compact, especially when it comes to placing the right-side cam drive and the clutch so close together.
    34. done Handling
    35. done Low Rear Shock Mount
    36. done With its low rear shock mount on the frame, the CRF250RX benefits from both a lower center of gravity (cg) as well as chassis stability.
    37. done Showa Spring Fork
    38. done The 49mm Showa fork features a conventional spring design that helps increase the CRF250RX’s front-suspension precision, handling and feel. The 39mm piston diameter and 25mm rod diameter guarantee a plush feel and supple action.
    39. done Short Swingarm
    40. done The CRF250RX’s short swingarm helps make it light, and also helps give the bike better rear-wheel traction, important considering how much power you have on tap. The design also reduces the bike’s unsprung mass.
    41. done Dunlop Geomax Tires
    42. done The CRF250RX’s Dunlop Geomax tires are specially designed for enduro use. The AT81 tires are spec’d at 80/100-21 for the front and 110/100-18 for the rear. You read that right: the CRF250RX rolls on an 18-inch rear wheel.
    43. done 260mm Front Brake
    44. done The CRF250RX’s large front-brake disc measures a whopping 260mm. You get great brake feel and a pattern that cuts down on weight. Front and rear brake-disc guards are part of the package too.
    45. done Comfort
    46. done Smooth Styling
    47. done Blending the CRF250RX’s body panels does more than just make the bike look smooth, fast, and stylish. It also helps you move around on the bike while riding. Nothing wrong with smooth, fast, and stylish, though.
    48. done “In Mold” Graphics
    49. done With the all the time you’ll be spending in victory circle, you need to look your best. The CRF250RX has you covered. Our “in mold” graphics look great, and stay looking good longer.
    50. done Rear Subframe
    51. done The 2019 CRF250RX’s subframe uses extruded rear members that produce a 20-percent reduction in weight versus the previous generation CRF250R. Since that weight comes off the top of the bike, it also contributes to the CRF250RX’s low center of gravity.
    52. done Flat Seat/Tank Junction
    53. done The 2019 CRF250RX features a flat seat/tank junction, including a titanium fuel tank. The superior ergonomics make it easier to move forward and back on the bike, increasing your control.
    54. done Black Rims
    55. done They may not help you go faster, but the sweet black DID rims sure look good.
    56. done Sidestand
    57. done Real enduro bikes need a sidestand, and we’ve given the CRF250RX a great one. Tucked up high and out of the way, this forged alloy piece is just another example of how the CRF250RX gets it right.
  • swap_vertSpecifications

      Engine & Drivetrain Engine type
      Liquid-cooled single-cylinder 4-stroke
      Displacement 249 cc Bore & stroke 79 mm x 50.9 mm
      Compression ratio 13.9:1
      Valve train DOHC, 4-valves
      Fuel delivery PGM-FI electronic fuel injection with 44 mm throttle body
      Transmission Close-ratio five-speed
      Final drive #520 sealed chain; 13T/48T
      Chassis & Suspension Front suspension USD Telescopic Spring fork
      Rear suspension Pro-Link® single shock
      Dimensions & Additional Information
      Tires Front: 80/100-21 Rear: 110/100-18
      Brakes Front: 260 mm disc with dual-piston caliper
      Rear: 240 mm disc with single-piston caliper
      Ground clearance 327 mm (12.9 in.)
      Seat height 960 mm (37.8 in.)
      Wheelbase 1,486 mm (58.5 in.)
      Curb weight 110.6 kg (244 lbs.) including required fluids and full tank of gas—ready to ride
      Fuel capacitym 8.5 litres
      Colour Extreme Red
      Competition Bike No Warranty

  • swap_vertAdditional Information