3766 1st Avenue (at Boundary Road) Burnaby, B.C. V5C 3V9
Toll free: 866 299-1022
Hours of Operation
Sunday & Monday: Closed
Tuesday – Friday: 9:00 am – 5:30 pm
Saturday: 9:00 am – 5:00 pm
HHT25SU Honda Trimmer (HHT25SUT4C)
The HHT25SUT4C trimmer is powered by Honda’s GX25, Mini 4-stroke engine. Light, powerful and packed with innovative features, it includes a newly designed, multi-strand drive cable that absorbs vibration and impacts when turning the included steel-brush cutting blade.
Other standard features include safety goggles, bike-type handles, professional double-loop shoulder harness, semi-matic (tap & go) trimmer head, 4-tooth cutter blade, heavy-duty drive clutch, electronic ignition for dependable starts, and low-tone muffler for quieter operation.
As a testament to their quality and reliability, all Honda trimmers come with a warranty of 24 months for non-commercial use and 12 months for commercial use.
- done25 cc Honda GX25 OHC Mini 4-stroke engine
Bevel gear drive
- done Bike-style handlebar with fingertip controls
- done25 cc Honda GX25 OHC Mini 4-stroke engine
ENGINE TYPE MINI 4-STROKE; OHC; SINGLE CYLINDER AIR COOLED MULTI-POSITION (360°)
Honda ENGINE MODEL GX25
DISPLACEMENT 25 CC (1.53 CID)
BORE AND STROKE 35 X 26 MM (1.4 X 1.0 IN)
MAXIMUM NET TORQUE 1.0 N•M (0.74 LBF-FT) @ 5;000 RPM
IDLE SPEED 3;100 ± 200 RPM
MAX. NO-LOAD RPM¥¥ (REQUIRES BLADE BARRIER) 10;000 RPM
IGNITION SYSTEM TRANSISTORIZED FLYWHEEL MAGNETO (ELECTRONIC)
SPARK PLUG CMR5H (NGK)
COOLING SYSTEM FORCED AIR
STARTING SYSTEM RECOIL STARTER
STOPPING SYSTEM IGNITION PRIMARY CIRCUIT GROUND
CARBURETOR DIAPHRAGM TYPE W/FUEL PUMP
RECOMMENDED FUEL REGULAR UNLEADED GASOLINE (87 OCTANE)
FUEL PRIMER ANTI-FLOOD TYPE
FUEL CAPACITY 0.50 LITRE (17.6 FL. IMP. OZ)
FUEL CONSUMPTION (APPROXIMATE)*** 0.5 LITRE/HR (0.11 IMP. GAL/HR)
CLUTCH DRIVE TYPE CENTRIFUGAL TWIN SHOE-CLUTCH
CLUTCH SIZE 54 MM (2 1/8 IN) DIAMETER
CLUTCH ENGAGEMENT 4;200 ± 200 RPM
AIR CLEANER SEMI-DRY TYPE
LUBRICATION SYSTEM OIL MIST
OIL CAPACITY 80 CC (2.82 FL. IMP. OZ)
RECOMMENDED OIL SAE 10W30 API SERVICE CLASSIFICATION SJ OR LATER
HANDLE TYPE U-SHAPED (BIKE TYPE HANDLE)
THROTTLE CONTROL TYPE TWO-MOTION TRIGGER TYPE
ENGINE STOP SWITCH SLIDE TYPE SWITCH
CUTTING HEAD (STANDARD) SEMI-MATIC LINE FEED NYLON (TAP & GO)
CUTTING HEAD (OPTIONAL) MANUAL; PRO-TAP
CUTTING WIDTH 43.2 CM (17.0 IN)
LINE TYPE ULTRA-QUIET
CUTTING LINE DIAMETER 2.41 MM (0.095 IN)
ANTI-VIBRATION SYSTEM STANDARD
DRIVE SHAFT TYPE FLEXIBLE STEEL CABLE
FINAL DRIVE GEAR CASE HELICAL CUT BEVEL GEARS / SEALED BALL BEARINGS
GEAR RATIO 1.235 INPUT SHAFT: 1 (OUTPUT SHAFT)
MAIN PIPE DIAMETER 25.4 MM (1.0 IN)
MAIN PIPE THICKNESS / MATERIAL 1.5 MM (.06 IN) / ALUMINUM
TRIMMER GUARD WITH CUTTER STANDARD
STEEL BLADE GUARD STANDARD
SHOULDER HARNESS N/A
PROFESSIONAL DOUBLE LOOP HARNESS STANDARD
SAFETY GOGGLES (A.N.S.I STD.) STANDARD
BLADE STD. (4-T X 22.9 CM / 9.0 IN) STEEL BRUSH CUTTING
BLADE BARRIER KIT¥ STANDARD
OVERALL LENGTH WITH CUTTER MOUNTED 191.0 CM (75.2 IN)
Overall Width (HANDLEBARS) 60.5 CM (23.8 IN)
Overall Height 41.5 CM (16.3 IN)
DRY WEIGHT WITHOUT BLADES 6.15 KG (13.6 LB)
Barrier Kit - Part #: 06631-VH8-740 $139.60
Brush / Wood Balde - Part #: 72511-VF9-D61 $44.73
Grass / Weed Blade - Part #: 72511-VF9-A02 $53.18
Grass / Weed Blade - Part #: 72511-VF9-E32 $27.81
Manual Trimmer Head - Part #: 72560-VF9-C12 $51.85
Pro-Tap Trimmer Head - Part #: 72560-VF9-C33AH $51.85
Semi-Matic Trimmer Head - Part #: 72560-VH8-642AH $47.34
Semi-Pro Trimmer Head - Part #: 72560-VF9-C41 $51.85
Trimmer Line, Bright Orange - Part #: 72511-080-0200A $14.25
Trimmer Line, Bright Orange - Part #: 72511-080-0400A $23.61
Trimmer Line, Bright Orange - Part #: 72521-080-1200A $59.80
Trimmer Line, Bright Orange - Part #: 72521-095-0855A $59.80
Trimmer Line, Bright Orange - Part #: 72521-095-1425A $94.45
Trimmer Line, Bright Orange - Part #: 72521-130-0750A $99.72
Trimmer Line, Clear, Quiet - Part #: 72512-095-0285Q $23.61
Trimmer Line, Clear, Quiet - Part #: 72512-095-0855Q $59.80
Trimmer Line, Grass Green - Part #: 72511-080-0200B $14.25
Trimmer Line, Grass Green - Part #: 72511-095-0285B $23.61
Trimmer Line, Grass Green - Part #: 72511-130-0150B $23.61
Trimmer Line, Grass Green - Part #: 72521-080-1200B $59.80
Trimmer Line, Grass Green - Part #: 72521-095-0855B $59.80
Trimmer Line, Grass Green - Part #: 72521-095-1425B $94.45
Weed / Brush Balde - Part #: 72511-VF9-E00AH $72.83
Weed / Brush Blade - Part #: 72511-VF9-003 $21.93
The listed Manufacturer's Suggested Retail Prices (MSRP) do not include installation costs and applicable taxes. Prices are subject to change without notice. See your Honda dealer for full details.
Every Honda trimmer features a reliable, efficient and easy-to-start 4-stroke engine that delivers smooth, quiet performance. All Honda trimmers meet or exceed EPA (Environmental Protection Agency) and CARB (California Air Resources Board) emissions standards. Plus, Honda trimmers are designed to operate efficiently at less than full throttle, which means they'll use even less fuel and create less noise than a trimmer operated at full throttle.
Honda Advantage Technologies
Each Honda trimmer is built using cutting-edge technology and innovation you just won’t find anywhere else. For example, Honda trimmers have exclusive ergonomic elements in their design, which allow for comfortable operation during prolonged use. And each Honda trimmer is built to be durable and reliable. After all, we have a legendary reputation of unsurpassed quality and performance to live up to each time you start up your Honda trimmer.
Honda trimmers are powered by Honda’s GX25 and GX35 mini 4-stroke engines, which are among the lightest and quietest 4-stroke engines on the market today. But don’t let their small size fool you: these easy starting engines perform even in the toughest conditions.
Honda trimmer engines are easier to maintain since they use regular gas that doesn’t require mixing with oil. And Honda trimmers have fewer emissions than a comparable 2-stroke trimmer.
Plus Honda trimmers are 360° inclinable, which means they can be operated and stored in any position – even upside down – without spillage or stalling.
Honda offers Quiet LineTM standard on all our models. This premium line reduces the noise level by another 5 decibels. And because Honda trimmers offer strong low-end torque, you can do many jobs at partial throttle, reducing noise levels even further.
Flexible Steel Cable Drive-Shaft
Honda’s flexible steel cable shaft is lighter, stronger and offers increased durability and superior shock absorption. It has a longer life than a solid shaft, and offers the strongest torsional strength in the industry. It’s much easier to service. And the flex shaft offers all of these benefits without increasing vibration or operator fatigue.
Easy To Start
There’s a reason Honda engines are renowned for easy starting, they use 4-stroke engine. With our superior design, Honda trimmers are incredibly easy to start! No hassle, no fuss. Just a quick, consistent, easy start.
Additional Accessory Trimmer Heads
A commercial-quality string trimmer head for use in all types of grass comes standard on all Honda trimmers. Depending on your needs, your Honda trimmer can be operated with a string cutting head or heavy-duty steel brush-cutting head when used with the appropriate optional accessories and equipment. Honda trimmer accessories not only help you keep your yard looking its best, they also help you work safely around the yard. All trimmers can use any of the four available cutting heads:
Manual Feed - Easily adjustable, spring-loaded twin .095" lines deliver a polished cut. Standard on HHT35SUKCT model.
Semi-matic - A quick, simple tap on a flat surface supplies two .095" lines for light jobs. Standard on HHT25SLTC, HHT25SUT4C and HHT35SLTCT models.
Semi-pro - Pro-grade semi-matic head dispenses two .095" lines with a quick tap (Optional).
Pro-tap - Heavy-duty head feeds two .105" lines with tap on a flat surface (Optional).